top of page

LG43

Traditional pin-type meter, for those looking for an essential tool.

LG43_3.png
DISCONTINUED

MOISTURE METERS

Panoramica LG43

Overview

LG43 is a resistance (pin-type) moisture meter which returns the moisture content of the materials measuring their electrical resistance through two electrodes that must be stuck into the material.

 

It is equipped with a microprocessor circuit to automatically compensate the readings from different materials (wood, building materials, paper).

It is especially suitable for measures on not dried/seasoned timber or to detect the distribution of the moisture across the material.

The measure performed using an alternate current, assuring an optimum stability even in case of high humidity contents.

 

The timber moisture indication is automatically compensated on basis of the timber temperature, which can be set manually by the operator (useful when measuring timber just out from the kiln dryer) or measured by the instrument by its internal sensor or the external RT/T sensor (optional).

Available versions

LG43_custodia_Versione_T.png

Version /T - C001551

The equipment in the /T version includes a plastic electrode holder accessory (Plastic Handle) for surface measurement using conductive rubber electrodes or very thin nails.

Accessories

Sensore Umidità Relativa.png

RH / T sensor

Transforms the LG43 into a complete diagnostic kit for your kiln dryer, being able to measure the temperature and relative humidity of the air, which can also be displayed in the form of EMC.

Technical specifications

  • Suggested measuring range (wood): 8-50%

  • Timber groups: 4

  • Building materials groups: 5

  • Leather groups: 2

  • Internal temperature indication: -10/50°C

  • Power supply battery: 9V 6F22

  • Battery life: 35h approx.

  • Case dimensions: 32,5x26x8 cm

  • Weight (/T - /M - /TM): 1,3 - 3,0 - 3,5 Kg. approx

  • Thermohygrometer (/w optional sensor)

  • Temperature range: -10/+80°C

  • Temperature accuracy: ±0.5 (0-40°C) ±1.2(-20+80°C)

  • Humidity range: 0-100% RH

  • Humidity accuracy: ±2% (10-90%) ±4% (0-10%)

Additional functions

  • Temperature indicator

  • Microprocessor based measurement compensation

  • Temperature compensation with internal external or settable temperature

  • High/low moisture alarms

  • Air temperature / RH / EMC measurement (optional sensor)

  • Auto-power off

  • Battery low indicator

What's in the box?

  • Plastic handle *

  • Hammer*

  • Assorted electrodes

  • Tightening key

  • Alkaline battery

  • User manual

  • Carrying case

* Depends on the version

Find out more

Software, Manuals, etc.
bottom of page